MR and BWR are the two grades covered by IS 303 plywood. Here is how they differ, where each one belongs, and what to ask a supplier.
Two grades under one standard
IS 303 is the Indian standard for commercial plywood. Two grades are sold under it: MR, which stands for moisture resistant, and BWR, which stands for boiling water resistant.
Marine grade plywood, often called BWP, is the top water-resistance grade. It is usually specified under a separate standard, IS 710. Trade reports say BIS has since added a BWP grade to IS 303 as well, so check the current standard before you specify.
What separates MR from BWR
The main difference between the two is the adhesive that bonds the veneers. MR plywood uses a glue that resists humidity and occasional dampness. BWR plywood uses a glue that holds up much better when it is exposed to water for longer.
Because the glue is what decides the grade, two sheets can look identical and still behave very differently once they get wet.
Where each grade belongs
MR plywood suits dry interiors such as wardrobes, beds and office furniture. BWR plywood is the safer choice where there is occasional or indirect moisture. Kitchens and bathrooms, where water is a constant risk, call for BWP.
Amazon Plywood's hardwood plywood adheres to ISI standards, which include ISI 303 (MR grade) and BWR (Boiling Water Resistant) grade.
What to ask a supplier
Ask which grade the sheet is, whether it carries the ISI mark, and which standard it is made to. A genuine grade claim should be easy to confirm on the sheet and in the paperwork.